Cleaning Instructions

PROPER CLEANING OF YOUR "ULTRA" C ELECTROSTATIC FILTER WILL
ASSURE YOU OF RECEIVING ALL THE BENEFITS THAT THE "ULTRA" C
WAS DESIGNED TO GIVE. YOUR "ULTRA" C MUST BE THOROUGHLY
CLEANED EVERY 30 TO 45 DAYS. CLEANING PERIOOD CAN VARY
DEPENDING ON YOUR GEOGRAPHIC LOCATION.

THE CARBON PAD ATTACHED TO THE OUTSIDE CAN NOT BE WASHED.
BEFORE CLEANING, PRESS DOWN THE WIRE CLOTH ONE SIDE AT A TIME
AND SLIP OUT THE CARBON PAD. VACUUM EXCESS DUST AND CARBON
PARTICLES FROM BOTH SIDES OF THE FILTER. SPRAY BOTH SIDES WITH
A GOOD DEGREASER SIMILAR TO SIMPLE GREEN OR A NON-ACID COIL
CLEANER. RINSE THOROUGHLY WITH CLEAN WATER. SHAKE FILTER TO
REMOVE EXCESS WATER AND STAND WITH DRAIN HOLES DOWN. WHEN
THE FILTER IS DRY, REPLACE THE CARBON PAD ONTO THE BACK OF THE
FILTER THE SAME WAY IT WAS REMOVED. THE CARBON PAD WILL NEED
TO BE REPLACED EVERY 3 TO 6 MONTHS OR AS ODORS RE-OCCUR.
ORDER REPLACEMENT PADS THOUGH YOUR DEALER.

AIR FLOW DIRTY AIR ENTERS FILTER. CLEAN AIR EXITS

CARBON ON CLEAN AIR EXIT